CANADA 
English
Specifications
Motor type: Induction
Output power: 25W (1/30 HP)
Voltage (VAC): 115V
Frequency: 50/60Hz
Circuit breaker requirements: 10A/120V
Current: 5.2A (startup), 1.3A (running)
RoHS compliant: Yes
Safety standards: UL/CSA/CCC/EN/CE
CE marking: Low voltage directives
Overheat protection: Built-in thermal protector (automatic return type). Operating temperature, open: 266°F + 9°F (130°C + 5°C) close: 179.6°F + 27°F (82°C + 15°C)
Ambient temperature range: Three-phase 200VAC: 14°F - 104°F (-10°C - 40°C) (non freezing)
Ambient humidity: 85% maximum (non condensing)
Degree of protection: Induction
Improved, more mesh, cylindrical shape for an easy drainage.
Specifications:
Input voltage: 6 Amp-110V NA
Tumbler diameter: 6.25"
Number of tumblers: x1
Human trimmer replacement: 15-20 people
Processing capability: Dry: 12-16 lbs/hrs - Wet: 60-80 lbs/hr
Cuts per minute: 25,000
CenturionPro HP3 Bucker & Stand included
Leaf collector for Twister T2
Specifications
Input Voltage: 230V
Motor: 2HP, UL & CSA Approved, Fan Cooled
Amps (running): 9
Amps (startup): 45A
Motor Speed: 3450 RPM
Airflow Capacity: 1700 CFM
Static Pressure: 10.5in of H20
Impeller: 12″ / 305mm, Balanced Aluminum
Inlet: 6″ / 153mm
Circuit Breaker Required: 15A, 240V
Connector (plug): 15A 250V (NEMA 6-15)
Sound Rating: 80 db
Fused: Yes
Filter Bag: 1-80 Micron
Collection Bag: 3 – 6 Mil
Generator Requirement: 10,000W
Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage
Maintenance: Clean impeller housing frequently. Replace filter bag
Heavy duty stainless steel construction
Industrial direct drive motor
Long lasting, food grade rubber fingers
Sealed bearing assembly
Razor sharp trim blade
Laser cut stainless steel grille
Adjustable blade height
Wider blade than the Pro-Cut Fast HD
“Fill and Spill” recovery system
Made in Canada
Motor Input Power: •1550 RPM •1/10 HP • 60Hz • 1.2A • 115V
This kit contains:
SERIAL NUMBER: (x 1)
LIMITED WARRANTY BY MANUFACTURER / RETURN WITH AUTORISATION (x 1)
Specifications:
110 V 50/60 Hz
115 W
No-Load Speed: 33000 r/min.
Diameter: 30 cm
Crystal catching bag
20 l/5 gal bucket required (not included)
Specifications
Input Voltage: 115V
Motor: 1HP
Amps (running): 10A
Amps (startup): 53A
Motor Speed: 3450 RPM
Airflow Capacity: 1190 CFM
Static Pressure: 6.45in of H20
Impeller: 10″ / 25.4cm
Inlet: 5 1/2″ / 139.7mm
Circuit Breaker Required: 15A, 120V
Connector (plug): 15A 120V (NEMA 5-15)
Sound Rating: 77 db
Fused: Yes
Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage
Maintenance: Clean impeller housing frequently. Clean filter bag
