Specifications:
Input voltage: 7 Amp - 110V NA
Tumbler diameter: 6.5"
Number of tumblers: x1
Human trimmer replacement: 20 people
Processing capability: Dry: 16-20 lbs/hr - Wet: 80-100 lbs/hr
Cuts per minute: 37.500
Bag diameter: 80 cm
Working bag (70 μm) holds ~1500g dry plant material
190 l/50 gal bucket required (not included)
Pro tip:The best Dry Sift results are obtained at low temperatures. Try to work in an air-conditioned environment or even a cold-room for top quality.Note: Beware of condensation water!
Leaf collector for Twister T2
Specifications
Input Voltage: 230V
Motor: 2HP, UL & CSA Approved, Fan Cooled
Amps (running): 9
Amps (startup): 45A
Motor Speed: 3450 RPM
Airflow Capacity: 1700 CFM
Static Pressure: 10.5in of H20
Impeller: 12″ / 305mm, Balanced Aluminum
Inlet: 6″ / 153mm
Circuit Breaker Required: 15A, 240V
Connector (plug): 15A 250V (NEMA 6-15)
Sound Rating: 80 db
Fused: Yes
Filter Bag: 1-80 Micron
Collection Bag: 3 – 6 Mil
Generator Requirement: 10,000W
Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage
Maintenance: Clean impeller housing frequently. Replace filter bag
The TRIMPRO ORIGINAL is an effective and very quiet leaf trimmer. It is used to remove excess leaves and twigs from different types of plants and flowers.
FORMAT:
Mounted machine: 18.2″ x 18.2″ x 27.2″
WEIGHT:
Approximated weight: 30 lbs
MATERIAL:
Frame & grate material: Aluminium
GRATES OPTIONS:
Option 1: Silence large (STD): large slots only (7/16″)
Option 2: Silence Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Option 3: Original Large: Large slots only (7/16″)
Option 4: Original Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Specifications:
Input voltage: 120V
Current draw: 14.8A
Blade motor: 1HP, fan cooled, stainless
Tumbler motor: 1/30HP, epoxy coated, watertight
Cut height: .040"- 1/25 - 1mm
Circuit breaker required: 20A, 120V
Discharge: 6" (152mm)
*** ONLY 1 UNIT LEFT IN STOCK***
The 3.0 is the highest capacity automated trimming machine in the world, guaranteed, producing the work of over 75 human trimmers without sacrificing quality. Suitable for either wet or dry flowers, this machine will harvest a whopping 60-70 lbs dry (300-350 lbs wet) per hour of use.
This kit contains:
SERIAL NUMBER: (x 1)
LIMITED WARRANTY BY MANUFACTURER / RETURN WITH AUTORISATION (x 1)
The TRIMPRO ORIGINAL is an effective and very quiet leaf trimmer. It is used to remove excess leaves and twigs from different types of plants and flowers.
FORMAT:
Mounted machine: 18.2″ x 18.2″ x 27.2″
WEIGHT:
Approximated weight: 30 lbs
MATERIAL:
Frame & grate material: Aluminium
GRATES OPTIONS:
Option 1: Silence large (STD): large slots only (7/16″)
Option 2: Silence Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Option 3: Original Large: Large slots only (7/16″)
Option 4: Original Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
For 1001D, 1001DTI, 1011D, 1011DTI and SEC-2002D pruners.
CANADA 
English
