GIRO'S BLUE PRUNER WITH STRAIGHT FINE BLADES SEC-1001D

Precision tool to propagate plants, take cuttings, etc.

Practical

Sterile

Individually wrapped

Disposable

This kit contains:

SERIAL NUMBER: (x 1)

LIMITED WARRANTY BY MANUFACTURER / RETURN WITH AUTORISATION (x 1)

Screen: 220 micron

Capacity: ~400 g dry plant material

Pro tip: Secure the zipper with a tie-rip before you begin. This is a quick and easy way to ensure that your pyramid bag will not open due to the movement in the washing machine, thus preventing any plant material from escaping into your machine.

Comes with:

one Corded Motor

one “Dry Trim” Piranha Blade

one Blade Scrubber Box

Specifications:

Electric Trimmer Specs: 120V AC, 60Hz .04 AMPS 

Weight: 1.06 lbs 

Cord length: 7 ft 

Tooth Section length: 1 3/4”

This 20 Gallon kit contains:

1 x 25 Micron bag

1 x 73 Micron bag

1 x 220 Micron bag

Specifications:

Input voltage: 7 Amp - 110V NA

Tumbler diameter: 2 x 6.5"

Number of tumblers: x2

Human trimmer replacement: 40-50 people

Processing capability: Dry: 32-40 lbs/hr - Wet: 160-20 lbs/hr

Cuts per minute: 75,000

Included with each machine is (1) 220 Micron Zipper Washing Bag

15 Minute timer with 3 minute increments

Built-in drain

Input washing power: 135w

Voltage: 110v

Frequency: 60hz

This kit contains:

SERIAL NUMBER: (x 1)

LIMITED WARRANTY BY MANUFACTURER / RETURN WITH AUTORISATION (x 1)

The new TRIMPRO ROTOR has been designed and developed at the request of end users who are looking for yet another gentle and efficient Trimpro quality product.

FORMAT:

Mounted machine: 16″ Diameter x 21″

WEIGHT:

Machine only: 30 Lbs

Machine and packaging: 42 Lbs

MATERIAL:

Frame: Aluminum

Grate: Steel

GRATE:

Trimpro Rotor (STD): Slots size 1/4″

100% hardened stainless steel blade and rivets

Razor sharp, extra thin blade cuts effortlessly without jamming or bending

High-productivity trimming with bigger and better results

Anti-corrosion, rust resistant

MSRP: $109.95

Leaf collector for Twister T2

Specifications

Input Voltage: 230V

Motor: 2HP, UL & CSA Approved, Fan Cooled 

Amps (running): 9 

Amps (startup): 45A 

Motor Speed: 3450 RPM 

Airflow Capacity: 1700 CFM 

Static Pressure: 10.5in of H20 

Impeller: 12″ / 305mm, Balanced Aluminum 

Inlet: 6″ / 153mm 

Circuit Breaker Required: 15A, 240V 

Connector (plug): 15A 250V (NEMA 6-15) 

Sound Rating: 80 db 

Fused: Yes 

Filter Bag: 1-80 Micron 

Collection Bag: 3 – 6 Mil 

Generator Requirement: 10,000W 

Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage 

Maintenance: Clean impeller housing frequently. Replace filter bag