The TRIMPRO ORIGINAL is an effective and very quiet leaf trimmer. It is used to remove excess leaves and twigs from different types of plants and flowers.
FORMAT:
Mounted machine: 18.2″ x 18.2″ x 27.2″
WEIGHT:
Approximated weight: 30 lbs
MATERIAL:
Frame & grate material: Aluminium
GRATES OPTIONS:
Option 1: Silence large (STD): large slots only (7/16″)
Option 2: Silence Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Option 3: Original Large: Large slots only (7/16″)
Option 4: Original Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Specifications
Construction: Food-Grade Stainless Steel & HDPE
Whisper Quiet Motor
Speed: Adjustable 1-20 Revolutions Per Minute
LED Work Light
Forward/Reverse Switch
Adjustable Timer
Power: 115v 60Hz at 40W 0.7 Amp
Trichome Collection Bin
Heavy Duty Stainless Steel Stand Included
Simple Clean Up
One-Year Manufacturer's Warranty
Made in the USA
centurion pro HP1 bucker , Stand is not included * add 2295$ for the stand.
CenturionPro HP1 Bucker
HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the
flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in
the industry’s highest buck rate per hour.
FORMAT:
Mounted machine: 39″ x 36″ x 51″ Height
WEIGHT:
Machine only: 162 Lbs
MATERIAL:
Frame: Aluminium
Grate: Steel
GRATES OPTIONS:
Option 1: Trimpro Automatik XL (STD): large slots only (7/16″)
Option 2: Trimpro Automatik XL small : Small slots only (1/4″)
Specifications:
Input voltage: 7 Amp - 110V NA
Tumbler diameter: 6.5"
Number of tumblers: x1
Human trimmer replacement: 20 people
Processing capability: Dry: 16-20 lbs/hr - Wet: 80-100 lbs/hr
Cuts per minute: 37.500
Specifications
Input Voltage: 115V
Motor: 1HP
Amps (running): 10A
Amps (startup): 53A
Motor Speed: 3450 RPM
Airflow Capacity: 1190 CFM
Static Pressure: 6.45in of H20
Impeller: 10″ / 25.4cm
Inlet: 5 1/2″ / 139.7mm
Circuit Breaker Required: 15A, 120V
Connector (plug): 15A 120V (NEMA 5-15)
Sound Rating: 77 db
Fused: Yes
Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage
Maintenance: Clean impeller housing frequently. Clean filter bag
FORMAT:
Mounted structure: 18.2″ x 18.2″ x 27.2″
WEIGHT:
Approximated Weight: 15 Lbs
MATERIAL:
Grate material: Stainless Steel
GRATES:
Stainless Steel (STD): Small slots (1/4″)
* See Trimbox for the information concerning the packaging of the machine.
Sealed bearing assembly
Long lasting rubber tongues
Heavy duty direct drive motor
Stainless steel construction
Ultra quiet
Made in Canada
The Pro-Cut Fast X-Blade is the upgrade for serious growers. The additional trimmer blades of the X-Blade keep your harvest in near constant contact while trimming, producing a clean and tidy flower. The extra thin blades trim effortlessly without jamming or bending. Decrease your trimming time while increasing the quality all thanks to the Pro-Cut Fast X-Blade.
100% hardened stainless steel blade and rivets
Razor sharp, extra thin blade cuts effortlessly without jamming or bending
High-productivity trimming with bigger and better results
Anti-corrosion, rust resistant
Made in Canada
Extremely powerful 30X magnification from optical-quality double-glass lenses shows ultra-fine detail.
Included with each machine is (1) 220 Micron Zipper Washing Bag.
15 Minute timer with 3 minute increments
Built-in drain
100% hardened stainless steel blade and rivets
Razor sharp, extra thin blade cuts effortlessly without jamming or bending
High-productivity trimming with bigger and better results
Anti-corrosion, rust resistant
These Mini Clip Scissors have a stainless steel blade, convenient finger loop, and a textured surface for a secure grip.
CANADA 
English
