- Out of Stock
Subcategories
Sort by:
- Out of Stock
- Out of Stock
- Out of Stock
- Out of Stock
Specifications:
110 V 50/60 Hz
115 W
No-Load Speed: 33000 r/min.
Specifications:
Input voltage: 7 Amp - 110V NA
Tumbler diameter: 2 x 6.5"
Number of tumblers: x2
Human trimmer replacement: 40-50 people
Processing capability: Dry: 32-40 lbs/hr - Wet: 160-20 lbs/hr
Cuts per minute: 75,000
Specifications:
Input voltage: 6 Amp-110V NA
Tumbler diameter: 6.25"
Number of tumblers: x1
Human trimmer replacement: 15-20 people
Processing capability: Dry: 12-16 lbs/hrs - Wet: 60-80 lbs/hr
Cuts per minute: 25,000
Specifications:
Input voltage: 7 Amp - 110V NA
Tumbler diameter: 6.5"
Number of tumblers: x1
Human trimmer replacement: 20 people
Processing capability: Dry: 16-20 lbs/hr - Wet: 80-100 lbs/hr
Cuts per minute: 37.500
Specifications:
Input voltage: 7 Amp - 110V NA
Tumbler diameter: 6.5"
Number of tumblers: x1
Human trimmer replacement: 20 people
Processing capability: Dry: 16-20 lbs/hr - Wet: 80-100 lbs/hr
Cuts per minute: 37.500
Specifications
Construction: Food-Grade Stainless Steel & HDPE
4x 180 Micron Screens (Standard)
4x 80 or 130 Micron Screens (Optional)
Whisper Quiet Motor
Power: 115v 60Hz at 6W 0.3 Amp
Speed: 20 Revolutions Per Minute
Capacity: 1.5 Cubic Feet
Adjustable Timer
Yield: 15%-25% By Weight
Trichome Collection Bin
Self Supporting Stand
Lock Pin Increases Ease of Use
One-Year Manufacturer's Warranty
Specifications
Construction: Food-Grade Stainless Steel & HDPE
Stock Faceplate: 2 Spring-Loaded Shearing Doors & 5 Various Sized Stem Guides
Alternate Faceplate: 4 Spring-Loaded Shearing Doors
Rear Shroud Directs Stems for Collection
One-Year Manufacturer's Warranty
Speed: Variable 1-80 RPM
Power: 115v 60Hz at 25W 1.7 Amp
Forward/Reverse Switch
Made in the USA
Destem Rate: 4-6 Pounds Per Hour
Whisper Quiet Motor
Standby/Run Switch
Simple to Clean
Specifications
Construction: Food-Grade Stainless Steel & HDPE
Whisper Quiet Motor
Power: 115v 60Hz at 25W 0.4 Amp
Forward/Reverse Switch
Speed: 20 Revolutions Per Minute
Adjustable Timer
Trichome Collection Bin
Tabletop Stand Included
One-Year Manufacturer's Warranty
Made in the USA
Dimensions: 18.125"W x 25"L x 21.5"H
Weight: 50 Pounds
Specifications
Construction: Food-Grade Stainless Steel & HDPE
Whisper Quiet Motor
Speed: Adjustable 1-20 Revolutions Per Minute
LED Work Light
Forward/Reverse Switch
Adjustable Timer
Power: 115v 60Hz at 40W 0.7 Amp
Trichome Collection Bin
Heavy Duty Stainless Steel Stand Included
Simple Clean Up
One-Year Manufacturer's Warranty
Made in the USA
Specifications
Vacuum motor: 5 HP
Cutter motor: 0.75 HP
Tumbler motor: 1/8 HP
Feed rate: Wet: 66-120 lbs/hr - Dry: 22-44 lbs/hr
Electrical & operating requirements: Single phase: 240V, 30 amps - 3 phase: 208V, 22 amps
Dimensions: 32" W x 43.5" L x 47" H
Total width: 43" with Trim Tote in place
Total length: 77.5" with input hopper and output shroud in place
Weight: 450 lbs
The Pro-Cut Dry can be disassembled in seconds with no tools. The stainless steel components and powder coated frame clean-up easily and quickly.
Sturdy stainless steel construction
1/10hp heavy duty motor with run capacitor
Pro Cut Dry is one of the largest dry trimmers on the market
Extremely quiet
15 minute timer
8 adjustable tumbler angles for perfect trim
Clear Lexan windows
Long life stainless steel basket, removable for easy cleaning
Powder coated steel stand
Made in Canada
Motor Input Power: •16 RPM •1/6 HP • 60Hz • 2.1A • 115V
Sturdy stainless steel construction
1/10hp heavy duty motor with run capacitor
Extremely quiet
15 minute timer
Powder coated steel stand
8 adjustable tumbler angles for perfect trim
Clear Lexan windows
Long life stainless steel basket, removable for easy cleaning
Made in Canada
Motor Input Power: •17 RPM •1/20 HP • 60Hz • 0.6A • 115V
Heavy duty stainless steel construction
Industrial direct drive motor
Long lasting, food grade rubber fingers
Sealed bearing assembly
Razor sharp trim blade
Fill and Spill recovery system
Made in Canada
Motor Input Power: •1550 RPM •1/10 HP • 60Hz • 1.2A • 115V
100% hardened stainless steel blade and rivets
Razor sharp, extra thin blade cuts effortlessly without jamming or bending
High-productivity trimming with bigger and better results
Anti-corrosion, rust resistant
The Pro-Cut Fast X-Blade is the upgrade for serious growers. The additional trimmer blades of the X-Blade keep your harvest in near constant contact while trimming, producing a clean and tidy flower. The extra thin blades trim effortlessly without jamming or bending. Decrease your trimming time while increasing the quality all thanks to the Pro-Cut Fast X-Blade.
100% hardened stainless steel blade and rivets
Razor sharp, extra thin blade cuts effortlessly without jamming or bending
High-productivity trimming with bigger and better results
Anti-corrosion, rust resistant
Made in Canada
Sealed bearing assembly
Long lasting rubber tongues
Heavy duty direct drive motor
Stainless steel construction
Ultra quiet
Made in Canada
Heavy duty stainless steel construction
Industrial direct drive motor
Long lasting, food grade rubber fingers
Sealed bearing assembly
Razor sharp trim blade
Laser cut stainless steel grille
Adjustable blade height
Wider blade than the Pro-Cut Fast HD
“Fill and Spill” recovery system
Made in Canada
Motor Input Power: •1550 RPM •1/10 HP • 60Hz • 1.2A • 115V
100% hardened stainless steel blade and rivets
Razor sharp, extra thin blade cuts effortlessly without jamming or bending
High-productivity trimming with bigger and better results
Anti-corrosion, rust resistant
MSRP: $109.95
Stainless steel construction
Heavy-duty direct drive motor
“Plug and Play” ready
Uses standard household voltage
Long lasting, food grade rubber fingers
Sealed bearing assembly
Razor sharp trim blade
Portable and compact
Made in Canada
Specifications:
ETL Listed: No
UL Listed: Yes
Operation: Motorized
Feed Type: Single Branch
Process Material: (Wet or Dry)
Max. Stem Diameter: 3/4"
Production Capability: 150lbs/hr
Voltage: 110V
Amps: 15A
GMP Compliant: Yes
Warranty: 5 Year
Specifications
Motor type: Induction
Output power: 25W (1/30 HP)
Voltage (VAC): 115V
Frequency: 50/60Hz
Circuit breaker requirements: 10A/120V
Current: 5.2A (startup), 1.3A (running)
RoHS compliant: Yes
Safety standards: UL/CSA/CCC/EN/CE
CE marking: Low voltage directives
Overheat protection: Built-in thermal protector (automatic return type). Operating temperature, open: 266°F + 9°F (130°C + 5°C) close: 179.6°F + 27°F (82°C + 15°C)
Ambient temperature range: Three-phase 200VAC: 14°F - 104°F (-10°C - 40°C) (non freezing)
Ambient humidity: 85% maximum (non condensing)
Degree of protection: Induction
Specifications
Motor type: Induction
Output power: 25W (1/30 HP)
Voltage (VAC): 115V
Frequency: 50/60Hz
Circuit breaker requirements: 10A/120V
Current: 5.2A (startup), 1.3A (running)
RoHS compliant: Yes
Safety standards: UL/CSA/CCC/EN/CE
CE marking: Low voltage directives
Overheat protection: Built-in thermal protector (automatic return type). Operating temperature, open: 266°F + 9°F (130°C + 5°C) close: 179.6°F + 27°F (82°C + 15°C)
Ambient temperature range: Three-phase 200VAC: 14°F - 104°F (-10°C - 40°C) (non freezing)
Ambient humidity: 85% maximum (non condensing)
Degree of protection: Induction
Leaf collector for Twister T2
Specifications
Input Voltage: 230V
Motor: 2HP, UL & CSA Approved, Fan Cooled
Amps (running): 9
Amps (startup): 45A
Motor Speed: 3450 RPM
Airflow Capacity: 1700 CFM
Static Pressure: 10.5in of H20
Impeller: 12″ / 305mm, Balanced Aluminum
Inlet: 6″ / 153mm
Circuit Breaker Required: 15A, 240V
Connector (plug): 15A 250V (NEMA 6-15)
Sound Rating: 80 db
Fused: Yes
Filter Bag: 1-80 Micron
Collection Bag: 3 – 6 Mil
Generator Requirement: 10,000W
Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage
Maintenance: Clean impeller housing frequently. Replace filter bag
Specifications
Input Voltage: 240V
Motor: 3 HP
Amps (running): 9
Amps (startup): 49
Motor Speed: 3450 RPM
Airflow Capacity: 1700 CFM
Static Pressure: 10 in H2O
Circuit Breaker Required: 15A, 240V
Connector (plug): NEMA 6-20P
Sound Rating: 80 db
Fused: Yes
Filter Bag:1-80 Micron
Impeller: 12.75 in.
Inlet (cyclone): 6″
Specifications:
Input voltage: 120V
Current draw: 14.8A
Blade motor: 1HP, fan cooled, stainless
Tumbler motor: 1/30HP, epoxy coated, watertight
Cut height: .040"- 1/25 - 1mm
Circuit breaker required: 20A, 120V
Discharge: 6" (152mm)
Specifications:
Input voltage: 120V
Current draw: 14.8A
Blade motor: 1HP, fan cooled, stainless
Tumbler motor: 1/30HP, epoxy coated, watertight
Cut height: .040"- 1/25 - 1mm
Circuit breaker required: 20A, 120V
Discharge: 6" (152mm)
Specifications
Input Voltage: 115V
Motor: 1HP
Amps (running): 10A
Amps (startup): 53A
Motor Speed: 3450 RPM
Airflow Capacity: 1190 CFM
Static Pressure: 6.45in of H20
Impeller: 10″ / 25.4cm
Inlet: 5 1/2″ / 139.7mm
Circuit Breaker Required: 15A, 120V
Connector (plug): 15A 120V (NEMA 5-15)
Sound Rating: 77 db
Fused: Yes
Extension Cord Gauge: 12AWG MINIMUM - Extension Cord Length: 25′ / 7.6m MAXIMUM ***Failure to meet these min. requirements can cause damage
Maintenance: Clean impeller housing frequently. Clean filter bag
Leaf collector filter bag 300 micron for Twister T4
Specifications:
Input voltage: 120V
Current draw: 2A
Blade motor: 200W/0.25HP
Tumbler motor: 6W/ 1/125HP
Cut height: 0.40” / 1/25 / 1mm - 25in / 63.5cm - 15in / 38.1cm - 16.5 in / 42cm - 5in / 127mm
An optional add-on to our popular Twister T4 Trimmer, the DRY trimming package gives T4 owners the freedom to choose between trimming WET or trimming DRY. The package includes one DRY tumbler, and a redesigned 70 micron leaf collection bag.
An optional add-on to our popular Twister T4 Trimmer, the DRY trimming package gives T4 owners the freedom to choose between trimming WET or trimming DRY. The package includes one DRY tumbler, and a redesigned 70 micron leaf collection bag.
Specifications
Input Voltage: 115V
Current Draw: 2A
Blade Motor: 200W / 0.25HP
Cut Height: .040in / 1mm
Discharge: 4in / 10.1cm
Circuit Breaker Required: 15A / 120V
Connector (plug): NEMA 5-15P
Fused: Yes, Thermally
Specifications
Input Voltage: 115V
Motor: 1HP
Amps (running): 7.5A
Amps (startup): 53A
Motor Speed: 3450 RPM
Airflow Capacity: 1000 CFM
Static Pressure: 6.45in of H20
Impeller: 10″ / 25.4cm
Inlet: 4″ / 10.1cm
Circuit Breaker Required: 15A, 120V
Connector (plug): NEMA 5-15P
Sound Rating: 94 db
Fused: Yes, thermally
Extension Cord Gauge: 14/3AWG MINIMUM - Extension Cord Length: 50′ / 15m
*** ONLY 1 UNIT LEFT IN STOCK***
The 3.0 is the highest capacity automated trimming machine in the world, guaranteed, producing the work of over 75 human trimmers without sacrificing quality. Suitable for either wet or dry flowers, this machine will harvest a whopping 60-70 lbs dry (300-350 lbs wet) per hour of use.
centurion pro HP1 bucker , Stand is not included * add 2295$ for the stand.
CenturionPro HP1 Bucker
HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the
flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in
the industry’s highest buck rate per hour.
CenturionPro HP3 Bucker & Stand included
Let the TRIMPRO AUTOMATIK do the job for you.
FORMAT:
Mounted machine: 18″ x 24.5″ x 41″
WEIGHT:
Approximated Weight: 79 lbs
MATERIAL:
Frame: Aluminium
Grate: Steel
GRATE:
Trimpro Automatik (STD): Slot size 1/4″
FORMAT:
Mounted machine: 39″ x 36″ x 51″ Height
WEIGHT:
Machine only: 162 Lbs
MATERIAL:
Frame: Aluminium
Grate: Steel
GRATES OPTIONS:
Option 1: Trimpro Automatik XL (STD): large slots only (7/16″)
Option 2: Trimpro Automatik XL small : Small slots only (1/4″)
The TRIMPRO ORIGINAL is an effective and very quiet leaf trimmer. It is used to remove excess leaves and twigs from different types of plants and flowers.
FORMAT:
Mounted machine: 18.2″ x 18.2″ x 27.2″
WEIGHT:
Approximated weight: 30 lbs
MATERIAL:
Frame & grate material: Aluminium
GRATES OPTIONS:
Option 1: Silence large (STD): large slots only (7/16″)
Option 2: Silence Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Option 3: Original Large: Large slots only (7/16″)
Option 4: Original Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
The TRIMPRO ORIGINAL is an effective and very quiet leaf trimmer. It is used to remove excess leaves and twigs from different types of plants and flowers.
FORMAT:
Mounted machine: 18.2″ x 18.2″ x 27.2″
WEIGHT:
Approximated weight: 30 lbs
MATERIAL:
Frame & grate material: Aluminium
GRATES OPTIONS:
Option 1: Silence large (STD): large slots only (7/16″)
Option 2: Silence Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
Option 3: Original Large: Large slots only (7/16″)
Option 4: Original Mixed: Small and large slots on the same grate (7/16″ et 1/4″)
FORMAT:
Mounted structure: 18″ x 18″ x 29″
WEIGHT:
Approximated Weight: 33 Lbs
MATERIAL:
Grate material: Stainless Steel
Frame material: Aluminium
GRATE:
Stainless Steel (STD): Slots size 1/4″